�һ�������Ƶ

Ph.D. in Aeronautics and Astronautics, Southampton University, (1983)

B.S. in Aeronautical Engineering, University of Southampton, (1978)

Expertise

Research Interests

Wind tunnel design and test techniques; experimental aerodynamics; magnetic suspension and levitation.

Articles

Britcher, C. P. and Schoenenberger, M. (2015). Feasibility of Dynamic Stability Measurements of Planetary Entry Capsules Using MSBS.

Britcher, C. P., Wells, J. M., Renaud, B. and Buvat, T. (2012). Aerodynamics of urban maglev vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 226 (6) , pp. 561–567.

Mokthar, W. and Britcher, C. P. (2009). Boundary Interference of High Blockage Models in Open-Jet Test Sections. SAE International Journal of Passenger Cars – Mechanical Systems , pp. pp.883-895.

Landman, D., Simpson, J., Mariani, R., Ortiz, F. and Britcher, C. P. (2007). Hybrid Design for Aircraft Wind-Tunnel Testing Using Response Surface Methodologies.. AIAA Journal of Aircraft vol.44 (no.4) , pp. pp.1214-1221.

Mokhtar, W. A. and Britcher, C. P. (2006). Wind-tunnel boundary corrections for a full-scale 1903 Wright Flyer replica. Journal of aircraft 43 (1) , pp. 64–71.

Newman, B. A., Britcher, C. P., Kassaye, Y., Roy, J., Krizansky, M. and Acheson, M. (2006). Trajectory Management Concepts for Future Small Aircraft Transportation Systems. AIAA Journal of Aircraft Vol. 43 (No. 6).

Mokhtar, W. and Britcher, C. P. (2006). Wind Tunnel Boundary Corrections for a 1903 Wright Flyer Replica. AIAA Journal of Aircraft 43 (1) , pp. pp. 64-71.

Britcher, C. P., Mariani, R., Craig, P., Gillespie, J., Monsi, M., Luna, D. and Sykes, M. (2004). Analysis of the Wright Brothers Wind Tunnel and Design of an Educational Derivative. AIAA Paper 1141 , pp. 1–9.

Kochersberger, K., Britcher, C. P., Crabill, N., Dominguez, K., Player, J., Hyde, K. and Warrenton, V. (2004). Flying Qualities of the Wright 1903 Flyer: From Simulation to Flight Test. AIAA Paper 105 , pp. 1–10.

Elsaadawy, E. A. and Britcher, C. P. (2004). Physical model of a propeller slipstream interacting with a boundary layer at low Reynolds number. AIAA paper 6590.

Britcher, C. P., Landman, D., Ash, R. L., Kochersberger, K. and Hyde, K. (2004). Predicted Flight Performance of the Wright ‘Flyer’Based on Full-Scale Tunnel Data. AIAA Paper 104 , pp. 1–10.

Zuckerwar, A. J., Ash, R. L., Britcher, C. P. and Landman, D. (2003). An Evaluation of the Wright 1901 Glider using Full-Scale Wind Tunnel Data. Journal of Aircraft 40 (3) , pp. 417-424.

Elsaadawy, E. A. and Britcher, C. P. (2003). Effect of propeller slipstream on heat-exchanger installations at low Reynolds number. Journal of aircraft 40 (4) , pp. 751–758.

Landman, D. and Britcher, C. P. (2001). Experimental investigation of multielement airfoil lift hysteresis due to flap rigging. Journal of Aircraft 38 (4) , pp. 703–708.

Landman, D. and Britcher, C. P. (2000). Experimental geometry optimization techniques for multi-element airfoils. Journal of aircraft 37 (4) , pp. 707–713.

Bloodgood, Jr, V. and Britcher, C. P. (1998). 37th AIAA Aerospace Sciences Meeting and Exhibit January 11-14, 1999/Reno, NV.

Britcher, C. P. and Bloodgood, D. V. (1998). Eddy current influences on the dynamic behaviour of magnetic suspension systems.

Britcher, C. P. (1998). Wind Tunnel Magnetic Suspension and Balance Systems With Transversely Magnetized Model Cores.

Britcher, C. P. and Landman, D. (1997). Jurassic tunnel- The life, death and resurrection of the Langley Full-Scale Tunnel. Wind tunnels and wind tunnel test techniques , pp. 8.

Britcher, C. P. and Groom, N. J. (1996). Computational Analysis of Static and Dynamic Behaviour of Magnetic Suspensions and Magnetic Bearings.

Neff, D. J. and Britcher, C. P. (1996). Design and Implementation of a Digital Controller for a Vibration Isolation and Vernier Pointing System. 3rd International Symposium on Magnetic Suspension Technology.

Landman, D. and Britcher, C. P. (1996). Experimental Optimization Methods for Multi-Element Airfoils (Final Report, period ended 31 Aug. 1996). AIAA 19th Advanced Measurement and Ground Testing Conference.

Britcher, C. P. and Alcorn, C. W. (1994). Boundary-layer influences on the subsonic near-wake of bluff bodies. Journal of aircraft 31 (2) , pp. 443–444.

Britcher, C. P. and Foster, L. E. (1994). Some further developments in the dynamic modelling and control of the large angle magnetic suspension test fixture.

Britcher, C. P. and Ghofrani, M. (1993). A magnetic suspension system with a large angular range. Review of scientific instruments 64 (7) , pp. 1910–1917.

Britcher, C. P., Ghofrani, M. and Britton, T. C. (1992). Analysis, modelling and simulation of the large-angle magnetic suspension test fixture.

Britcher, C. P. and Alcorn, C. W. (1991). Interference-free measurements of the subsonic aerodynamics of slanted-base ogive cylinders. AIAA journal 29 (4) , pp. 520–525.

Britcher, C. P. (1991). Recent aerodynamic measurements with magnetic suspension systems. High Reynolds Number Flows Using Liquid and Gaseous Helium , pp. 165.

Groom, N. J. and Britcher, C. P. (1991). Stability considerations for magnetic suspension systems using electromagnets mounted in a planar array.

Britcher, C. P., Kilgore, W. Allen. and Alcorn, C. W. (1989). Subsonic sting interference on the drag of a family of slanted-base ogive-cylinders.

Boyden, R. P., Kilgore, R. A., Tcheng, P. and Britcher, C. P. (1988). Super magnets for large tunnels.

Britcher, C. P., Goodyer, M. J., Eskins, J., Parker, D. and Halford, R. J. (1987). Digital control of wind tunnel magnetic suspension and balance systems.

Britcher, C. P. (1985). Progress toward magnetic suspension and balance systems for large wind tunnels.. J. AIRCRAFT. 22 (4) , pp. 264–269.

Britcher, C. P., Goodyer, M., Scurlock, R. and Wu, Y. (1984). A flying superconducting magnet and cryostat for magnetic suspension of wind-tunnel models. Cryogenics 24 (4) , pp. 185–189.

Britcher (1984). Progress towards large wind tunnel magnetic suspension and balance systems.

Book Chapters

Britcher, C. P. (1998). Application of magnetic suspension and balance systems to Ultra-High Reynolds number facilities Flow at Ultra-High Reynolds and Rayleigh Numbers (pp. 81–95) Springer.

Britcher, C. P. (1998). Opportunities for Application of Superconducting Magnet Technology to Large-Scale Magnetic Suspensions Advances in Superconductivity X (pp. 1319–1324) Springer.

Conference Proceeding

Britcher, C. P., Landman, D., Duvall, B., Dodda, V. KR., Lowe, C. and Patel, M. (2017). An Aeroacoustic Study of Propellers for Small Electric Propulsion Aircraft 23rd AIAA/CEAS Aeroacoustics Conference (pp. 3710).

Britcher, C. P., Joshi, K. K., Bledsoe, J. F. and White, E. (2016). Studies of a Hot Wire Anemometer with Digital Feedback 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (pp. 4324).

Phillips, B. D. and Britcher, C. P. (2014). A Study of Potential Test Capabilities of the NASA Langley 0.3-Meter Transonic Cryogenic Wind Tunnel 30th AIAA Aerodynamic Measurement Technology and Ground Testing Conference (pp. 2654).

Koc, I., Britcher, C. P. and Wilkinson, S. (2012). Investigation and active control of bluff body vortex shedding using plasma actuators 6th AIAA Flow Control Conference, AIAA (pp. 2012).

Mokhtar, W. and Britcher, C. P. (2009). Further Analysis of Pickup Trucks Aerodynamics SAE World Congress and Exhibition.

Koc, I., Britcher, C. P. and Yalcin, S. Eren. (2008). Phase Averaged Velocity Fields for Bluff Bodies Using a PIV System Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition.

Williams, B. and Britcher, C. P. (2008). Development of an Acoustic Measurement Technique for Automobile Testing in Open-Jet Wind Tunnels 26th AIAA Aerodynamic Measurement Technology and Ground Testing Conference.

Mokhtar, W. and Britcher, C. P. (2007). A Numerical Method to Predict Boundary Distortion and Interference of Open Jet Test Sections 37th AIAA Fluid Dynamics Conference and Exhibit.

Newman, B. A., Britcher, C. P., Kassaye, Y., Roy, J., Krizansky, M. and Acheson, M. (2006). Descent Management Strategies for Future Small Aircraft Transportation Systems AIAA Guidance, Navigation, and Control Conference and Exhibit.

Landman, D., Simpson, J., Mariani, R., Ortiz, F. and Britcher, C. P. (2005). A High Performance Aircraft Wind Tunnel Test Using Response Surface Methods U.S. Air Force T&E Days.

Newman, B. A., Britcher, C. P., Kassaye, Y., Roy, J., Krizansky, M. and Acheson, M. (2005). Trajectory Management Concepts for Future Small Aircraft Transportation Systems Arlington, Virginia: Proceedings of the AIAA-IEEE Digital Avionics Systems Conference .

Britcher, C. P. and Stephenson, P. (2005). Aerodynamic Calibration of an Automotive Climatic Wind Tunnel AIAA/ASME/SAE/ASEE 41st Joint Propulsion Conference and Exhibit.

Britcher, C. P. (2005). Comparison of Aerodynamic Measurements of a Full-Scale NASCAR in Open and Closed Jet Test Section SAE 2005 World Congress.

Ralston, J., Kochersberger, K., Britcher, C. P. and Hyde, K. (2004). 1903 Wright Flyer Simulation for Flight Support and Training AIAA Atmospheric Flight Mechanics Conference and Exhibit (pp. 4825).

Mokhtar, W. A. and Britcher, C. P. (2004). Boundary interference assessment and correction for open test section wind tunnels using panel methods 42nd AIAA Meeting (pp. 2004–609).

Shu, Q., Cheng, G., Yu, K., Hull, J. R., Demko, J. A., Britcher, C. P., Fesmire, J. E. and Augustynowicz, S. D. (2004). Low thermal loss cryogenic transfer line with magnetic suspension AIP Conference Proceedings (pp. 1869–1876).

Britcher, C. P. and Landman, D. (2003). A New Education Program for Aerospace Graduate Students 41st Aerospace Sciences Meeting and Exhibit (pp. 798).

Shu, Q., Cheng, G., Yu, K., Hull, J. R., Demko, J. A., Britcher, C. P., Fesmire, J. E. and Augustynowicz, S. D. (2003). Energy efficient cryogenic transfer line with magnetic suspension AIP Conference Proceedings (pp. 321–327).

Britcher, C. P. (2002). Ancient Integrals and Modern Numerics-Where’s the Physics? 20 th AIAA Applied Aerodynamics Conference, Saint Louis, MO.

Elsaadawy, E. and Britcher, C. P. (2002). Experimental investigation of the effect of propeller slipstream on a heat exchanger installation at low Reynolds number 1 st Unmanned Aerospace Vehicles, Systems, Technologies, and Operations Conference and Workshop, Portsmouth, VA.

Landman, D., Britcher, C. P. and Martin, P. (2000). A study of ground simulation for wind tunnel testing of full-scale NASCAR’s 38th Aerospace Sciences Meeting and Exhibit (pp. 153).

Elsaadawy, E. A. and Britcher, C. P. (2000). Experimental investigation of the effect of propeller slipstream on boundary layer behavior at low reynolds number 18th Applied Aerodynamics Conference (pp. 267–276).

Landman, D., Britcher, C. P. and Bennett, W. (1999). A power-on full-scale wind tunnel test of a UAV 17th Applied Aerodynamics Conference (pp. 3166).

Bloodgood, Jr, V. and Britcher, C. P. (1999). Design optimization of magnetic suspension systems 37th Aerospace Sciences Meeting and Exhibit (pp. 832).

Wang, T., Martin, P. and Britcher, C. P. (1999). Surface Heat Exchangers for Aircraft Applications: A Technical Review and Historical Survey 37th AIAA Aerospace Sciences Meeting and Exhibit (pp. 1999–0119).

Britcher, C. P. and Landman, D. (1998). From the 30 by 60 to the Langley Full Scale Tunnel 36th AIAA Aerospace Sciences Meeting and Exhibit (pp. 145).

Landman, D. and Britcher, C. P. (1995). Advanced experimental methods for multi-element airfoils 13th Applied Aerodynamics Conference (pp. 1784).

Britcher, C. P. (1993). Dynamic modelling of a laboratory model magnetic suspension test fixture with large angular capability PICAST’1 1993- Pacific International Conference on Aerospace Science and Technology, National Cheng Kung University, Tainan, Taiwan (pp. 1506–1514).

ALCORN, C. and Britcher, C. P. (1993). The influence of the boundary layer on the subsonic near-wake of a family of bluff bodies 31st Aerospace Sciences Meeting (pp. 525).

Groom, N. J. and Britcher, C. P. (1992). A description of a laboratory model magnetic suspension test fixture with large angular capability Control Applications, 1992., First IEEE Conference on (pp. 454–459).

Britcher, C. P. (1992). Large-gap magnetic suspension systems International Symposium on Magnetic Suspension Technology, Part 2.

Britcher, C. P. (1988). Progress towards extreme attitude testing with Magnetic Suspension and Balance Systems 15th Aerodynamic Testing Conference (pp. 2012).

Alcorn, C. William. and Britcher, C. P. (1988). An experimental investigation of the aerodynamic characteristics of slanted base ogive cylinders using magnetic suspension technology AIAA 15th Aerodynamic Testing conference.

Kilgore, R. A., Dress, D. A., Wolf, S. WD., Branch, E. Techniques. and Britcher, C. P. (1988). TEST TECHNIQUES-A survey paper on cryogenic wind tunnels, adaptive wall test sections and magnetic suspension Transonic Symposium: Theory, Application, and Experiment, Volume 1 (pp. 705).

Britcher, C. P. and Goodyer, M. (1979). The Southampton University magnetic suspension/cryogenic wind tunnel facility International Symposium on Cryogenic Wind Tunnels, 1 st, Southampton, England (pp. 10).

Presentations

Bledsoe, J., White, R. and Britcher, C. P. (June , 2017). Development of a Digital Bridge Thermal Anemometer AIAA Aviation 2017 .

Mokhtar, W., Britcher, C. P. and Hasan, M. (October , 2015). Wall Interference of High-Blockage Vehicles – a CFD Study SAE 2015 Commercial Vehicle Engineering Congress (COMVEC) Rosemont,IL.

Britcher, C. P. (June , 2015). Some Thought on Wind Tunnel Flow Quality 2nd Joint Conference of STAI and SATA Newport News,VA.

Britcher, C. P. (March , 2013). Real-World Design Challenges – a Crucial Component of STEM Teaching and Learning 2013 ASEE SE Regional Conference Cookeville,TN.

Britcher, C. P. and Grossman (March , 2013). Ten Years Experience with a Multi-University Collaborative Graduate Education Program 2013 ASEE SE Regional Conference Cookeville,TN.

Britcher, C. P. (October , 2001). An Analysis of Flight Number 4, December 17th, 1903 nternational Symposium on Flight Raleigh,NC.

Britcher, C. P. (October , 2000). The �һ�������Ƶ Maglev Project Virginia Engineers Conference Virginia Beach, Virginia.

Britcher, C. P. (June , 1997). Jurassic Tunnel - the life, death and resurrection of the Langley Full Scale Tunnel Subsonic Aerodynamic Testing Association (SATA). Colorado Springs.

Britcher, C. P. (June , 1996). Application of magnetic suspension and balance systems to ultra-high Reynolds number facilities. International Workshop on High Reynolds Number Flows .

Britcher, C. P. (December , 1995). Some thoughts on unconventional low-drag heat exchangers for high-altitude atmospheric research aircraft ERAST Alliance, NASA Dryden Flight Research Center .

Britcher, C. P. (October , 1989). Recent aerodynamic measurements with magnetic suspension systems 7th Oregon Conference on Low Temperature Physics Eugene,OR.

Britcher, C. P., Dress, Johnson, W. and Boyden, R. (April , 1987). Status of aerodynamic tests using the 13 inch magnetic suspension and balance system 67th meeting of the Supersonic Tunnels Association Nashville, Tennessee.

Britcher, C. P. (April , 1985). Status of magnetic suspension research at NASA Langley Research Center 63rd meeting of the Supersonic Tunnels Association Dallas,Texas.

Boom, R., Eyssa, Y., McIntosh, G. and Britcher, C. P. (September , 1984). Superconducting electromagnets for large wind tunnel magnetic suspension and balance systems 1984 Applied Superconductivity Conference San Diego,California.

• Honorary Superior Accomplishment Awards, NASA Langley Research Center
• 2004: NASA Turning Goals into Reality (TIGR), NASA
• 1995: Faculty of the Year Award, �һ�������Ƶ AIAA Student Chapter
• 1978: Royal Aeronautical �һ�������Ƶ Prize, University of Southampton